Guadalupe River

-

Report from the Guad!

 

 

jonesy_84: Re: Guadalupe River

Like others said go sooner than later. The water is fishing great right now. Lots of big bows and eager smaller browns in certain areas. Good luck! Heres a couple from last week.
http://texasfishingforum.com/forums/pics/usergals/2017/05/full-53609-160167-img_20170411_125122_214.jpg
http://texasfishingforum.com/forums/pics/usergals/2017/05/full-53609-160168-img_20170411_125853_204.jpg

 

 

Retrieved from http://texasfishingforum.com/forums

Comments

Post a Comment

Enter a keyword to search for archived posts.

Popular posts from this blog

TRDW Flyfest...

-
Image
Had a great time at TRWD Flyfest yesterday. Checked out some of the fly tying demos, and joined the fishing contest on a whim. Had brought fly fishing gear out of habit but left the chest waders. Had put the waders away since the Trout Stocking Season was winding down. While walking around, stopped by the fishing contest booth and learned that an opening was available for the next heat. Decided to sign up when I remembered the hip waders were in the pick up. Kept them there as a backup set of waders, and forgot to put them away. Good thing… ended up using them for the contest. The contest worked in two-man Teams – one fisherman fished for 10″ while the other fisherman waited, then they would switch when a horn sounded. We ended up getting three on the line – one was almost landed but the other two were on the line briefly before throwing the hook or breaking off the line. For the one that was almost landed, had forgot to bring the landing net (it was put it away in the garage already).
Read more

How Do We Clean and Cook Trout?

-
Image
Question from one of our Readers asking, “How do we clean and cook trout?” In answer to the question, we provide a summary of the different ways we clean and cook trout! Depending on the size of the trout, we clean and cook them as follows: Stocker size trout (9″-13″ in size) : We cut their heads or remove the gills (“gilling”), and then we remove the guts. Not sure why we opt to cut the head off versus “gilling” them; just seems to go one way or the other from trip to trip. When cooking the Stockers, we season them with salt and pepper (sometimes add Season Salt), and then pan fry them in oil for about 5-8 minutes each side. For larger trout in the 14″ – 18″ range: We clean them like the Stockers but will split the fish (butterfly). We then cook them on a cedar plank (see Grilled Plank Trout Recipe ). For trout going 19″+ in size: We gill them and remove the guts, leaving the head in place. Then, we stuff with lemon slices, onions, butter, and sprinkle Rosemary in the body cavity. Nex
Read more

Over-Lining Our Fly Rods

-
Image
Not sure when we started doing this, but we tend to over-line (go up one line weight) on our 4-Wt and 5-Wt fly rods. I think we did this by accident when we used whatever fly line we had at the time we picked up a new fly reel. So far, have been good with the casting results by going up a weight. That said, was not aware of a debate about this, until I saw an article online by Field and Stream – “ Is Over-Lining Fly Rods Good or Bad? ” For the most part, would agree with Field and Stream that there are no set rules. Would go on to say, “whatever works best for you”!  
Read more

Fly Fishing : Stripers below PK - Not Good!

-
Not good on PK… spacemonkey: Stripers below PK Bad news there must've been an algae bloom or something because there were lots of big dead stripers below PK dam this morning all the way down to Flint bend. I must've seen more than 50 ! Retrieved from http://texasfishingforum.com/forums ​
Read more

Ukulele and Q&A and Near Deere Give Away!

-
Image
Starting an impromptu live stream for some ukulele fun and fishing Q&A! Plus a Near Deere Give Away with a twist… This round we are giving away two White Near Deere tied on 1/80oz fly jigs and one Marilyn Monroe Tenkara Fly. The extra weight of the 1/80 oz fly jigs helps fishing deeper spots when the trout are lurking deep. And, the white color is what we had the local trout interested in last Saturday when the temps were well below freezing! To win this round… we wrote down a number from 1 to 100 on our whiteboard. First to guess the number and post in the comments either on this video or on our Facebook Page wins the number we wrote down wins! Addendum: One modification to the rules, One entry per day to guess the number. We are located in the US Central timezone. We will provide comments indicating a Win, else will give a hint to the answer at least once a day. That is first to guess the number with a US address wins! Good Luck!
Read more

Below the Dam at Texoma September 15, 2016

-
Image
Another great report from Denison Dam…. texoma1231: Below the Dam at Texoma September 15, 2016 Fished below the dam at Texoma yesterday. They were running only one generator and that creates an advantage for the Texas side and especially for fly fishing. The fish were only 40 feet or so from the bank. I am guessing but I think that these fish were 3 to 3 1/2 lbs. I caught and released 12 total and some could have been bigger but not by much. Water quality is improving but still not where it should be. It will only get better. Fish were very healthy and in good condition. Fly of choice was a small white bait fish. It can be seen in the photos. No weight on the fly. If you are just learning how to fly fish, this is a great opportunity to have some success as the fish are (were)in easy casting distance from the bank. Great fighting fish for anyone to catch!!!! Tight Lines   Retrieved from http://texasfishingforum.com/forums
Read more

Denison Dam Tonight

-
Always good to  get reports from the Lake Lavon Fishing Team!   They now seem to be on a regular schedule of turning on the water at 12:40 pm and turning it off at 5:00 pm on weekdays. The stripers are beginning to school some beginning around noon, but they really turn on when the siren blows signalling the start of generating. They will stay up busting the top for 20-30 minutes and you can have a lot of fun fishing from shore on the Texas side during that time period because they are schooling right next to the shore. Sometimes they will also feed on top right after they turn the water off. They will hit topwater pencil poppers with abandon while they are schooling! I think the siren causes a vibration in the water which causes the shad to start moving and the stripers are ready and waiting for them. Get up there and have some fun, guys!!   Regards, The Lake Lavon Fishing Team.   Retrieved from http://forum.lakelavonfishing.com    
Read more

PMC Emerger for Some Fun with Bluegill at Bethany! #flyfishing

-
Image
Quick trip to the local pond yesterday for some fun with little Bluegill. Caught five that went for a PMC Emerger! No Bruisers but still lots of fun! Pictures at the end of the video are blurry; gotta work on the photography skills but the video action tells the story! PS: Really liking the new hat! Log Book Entry: 1/19/17 Time: 17:20 to 18:00 Weax: Clear, “Hoodie Jacket”, Calm Rod: Redington Classic Trout 5wt – 9′ Reel: Echo Ion 4/5 – 6wt Flyline Comments: Fished the Main Pond without success using a Purple Near Deere, and then switched to a PMC Emerger without a strike as well. Noticed the “black midges” on the water and an ongoing hatch. Remembered past seasons where the Bass and Bluegill were actively feeding on them. Used a Griffith’s Gnat on a caddis hook then; hoped the PMC Emerger would work this round. Moved on to the Back Pond, and observed little swirls in the water. Something was actively feeding on the hatching midges. Soon after, started catching Bluegill! Did not see any
Read more

Blue River for Switch Rod Casting Practice...! #switchrod #flyfishing

-
Image
Made it to the Blue River today to check things out. Great day to go… only one little Bass this round but did get lots of casting practice in with the Switch Rod – 6 Weight Cabelas TLR combined with the Liquid Lamson 4 and the Rio Switch Chucker line is balancing well. Getting great casts and distance with the two-handed Switch Cast now. Plus… always good to be able to fall back to the cast we use when shoulder is hurting from a past injury. For want of a name for it, calling it the “hurt shoulder cast”. Here is a video snippet of some of the casts used today.
Read more