More Kayak Fishing at Texoma... #kayakfishing

-

Cooler temps this morning but did make the run to Texoma and put in a Spillway Ramp. Had one school pass and was able to catch one Striper. Later, worked a school of shad and was able to catch a Gaspergou. All was quiet, trolling, jigging, and sight casting but no more schools breaking the surface like the other two trips. However, did get one more Striper while casting to point. Still working on the video; will get it out in the next few days.

PS: Having the depth finder (Lowrance Hook 3X DSI) made a difference in locating schools of shad!

Comments

Post a Comment

Enter a keyword to search for archived posts.

Popular posts from this blog

Join the TRWD at Mayfest

-
Image
Good info! TRWD - Water Supply • Flood Protection • Recreation             This email was sent to gbtx@hotmail.com . If you would prefer to stop receiving TRWD emails, you can UNSUBSCRIBE at any time. Please do not reply to this email as we are not able to respond to messages sent to this address. Tarrant Regional Water District 800 East Northside Drive Fort Worth, TX 76102 CONTACT US at any time or give us a call at 817-335-2491. © 2015 Tarrant Regional Water District
Read more

Today's Catch Ultralight Baitcasting | Average Joe's Broadcast, Let's Talk Fishing Series 😎

-
Image
Trout stocking at our local pond - Bethany Lakes in Allen, Texas! Not able to see them stock the trout but did make it later in the evening. Lots of trout, lots of fishermen, luckily did manage to limit out!  Gear Used Shimano Reel 17 Scorpion BFS XG Right https://amzn.to/3K6KwFV Kastking Zephyr with clicker: https://amzn.to/3KB9H3D Kastking Zephyr: https://amzn.to/3sFbrPe BPS Micro Lite Rod: https://bassproshops.vzck.net/RyLezv Black https://amzn.to/3nvUIyO Copper https://amzn.to/3hw7HfX Rainbow Trout https://amzn.to/3947UT1 Brass https://amzn.to/391wJyU
Read more

DIY Tanago Rod

-
Image
More tinkering around with ice fishing rod components. For ease of reference, calling it the Do It Yourself (DIY) Tanago Rod. Going to use it for Micro Fishing; hopefully to catch one of those “guppy” looking fish! Easy to make… used a 20″ solid fiberglass ice fishing rod, a 12″ wooden handle, and a braided cord for the lillian. Add some 2 pound test mono – smallest line in the tackle box, ready to try it out! DIY Tanago Rod compared to Micro Fly Rods
Read more

Back to Murphy for More Trout This Sunday Morning! #flyfishing #guadalupana

-
Image
Had a great time yesterday fishing Murphy City Complex Pond for trout. Went back again today with the same setup… Redington Pursuit 4wt-8′ fly rod and Ross Flystart Model 2. Used a size 14 Guadalupana to take a limit today! Fun stuff!     Log Book Entry: 2/26/17 Location: Murphy City Complex Pond (Murphy) Time: 07:30 – 08:30 Weax: Clear, “Sweater & Under Armour”, Slight Breeze Rod: Redington Pursuit 4wt – 8′ Reel: Ross Flystart Model 2 – 4wt Flyline   Comments: Lots of fishermen on arrival at the pond with a good number fly fishing! Action was steady with Super Dupers continuing to produce for spin fishermen. Guadalupana (as well as Wooley Buggers) did well for fly fishermen. Not able to determine bait preferences but it looked like limits were being taken by bait fishermen. Corn, Trout Worms, and Power Bait worked well at yesterday’s derby. Suspect the same held true this round.   Landed: 14 Rainbow Trout – 9″-12″ ...
Read more

Black Near Deere Variant

-
Image
Here is a variant of the Near Deere tied using the same material as the Olive Near Deere but uses one black marabou plume and no chenille. Instead, the marabou plume is used in place of the chenille. We still prefer using chenille when tying a Near Deere, but in making do with what we have, this approach allows us to skip a trip to Cabelas just for one item – black chenille. The pattern works for stocker trout in our area, and skipping the chenille makes for a quicker tie. Do check out the steps below on how we tie the Black Near Deere Variant.   Tying the Black Near Deere Variant Picture 1 First step is to build the thread base like normal, ending just slightly past the point where a perpendicular line from the hook point to the hook shank would intersect. Then, build a slight “hump” with the tying thread as shown in Picture 1. The hump helps lift and spread the feathers of the marabou tail from the hook shank.     Picture 2 Next, measure a hook shank l...
Read more

Fly Casting with a Three Foot Fly Rod and no Reel... Hand Hold Revisited? #orvis #practicaster #demo

-
Image
This video answers the mail – a YouTube Viewer requested we show the hand hold we used in the video One Rod, No Reel. The intent of the One Rod, No Reel was to show quality fly line was more important than the fly reel, and the suggestion was to focus more on a quality fly line, followed by the fly rod, and then the fly reel for most fishing situations. In One Rod, No Reel, we used a premium but old 5wt WF Fly line that we have since retired… keeping about 8 yards of the forward portion of the fly line, attaching it to a short section of dacron backing, and a rubber band. We then attached the rubber band to the rod handle, and then demonstrated casting without a fly reel as well as catching a trout or two at a local pond. To answer the mail, we removed the 4wt fly reel that was zip tied to an Orvis Practicaster, and used the heavy “rope like” practice line that came with it to show the hand hold used. And since, we still had the fly line used in the One Rod, No Reel vi...
Read more

Fly Fishing Tips... How We Fish the Betts Bream Getter!

-
Image
TBT time Friday evening fishing an old favorite of ours… the Betts Bream Getter. It’s the fishing fly we derived the Foam Spider pattern we tie. This one we picked up at Cabelas but unfourtunately lost it to a snag. Will have to either buy another or tie one using the kit we bought last year from Waspi! No worries though had a great time fishing it for Bass and Bluegill. Key tips this round when fishing the Betts Bream Getter: First, stand-off from the bank about 5 to 10 yards and work the area near the bank. Anticipate a strike. If none, then proceed closer and work the pond casting out as well as along the bank. Second, wait to start the retrieve 5 to 10 counts, letting the fishing fly sit motionless. Oftentimes, a strike will happen. Next, start the retrieve with short pulls on the fly line to create a stop and go motion. Do pause between pulls, and do watch for a fish trailing behind it. If a fish is trailing but does not want to commit to striking, even when the fishing fly i...
Read more

Simple Fly Tying Pattern | Pat's Rubber Leg Variant

-
Image
Been trying to tie the Pat’s Rubber Leg by watching others tie the pattern. So far, has been a rough go. But, did make some adjustments to one variant that has an extended body, and then used a tying method to attach the legs that is easier for yours truly… same method I use to tie legs on a Foam Spider/Grasshopper. Do check back… plan to “test” it out at a local pond, and then tie more if it produces a fish or two. And then, hopefully… on to the Blue River and/or local stocked trout! More to come!
Read more

Quick Trip to South Lakes in Denton! #flyfishing

-
Decided to check out the action at South Lakes Park in Denton. Recently stocked with trout, South Lakes can be a hit or miss trip based on when the trout were stocked and their willingness to bite. Today, we saw trout out moving about but unfortunately not near our fishing fly. Did catch several Bluegill but struck out on trout. Did see others catching a trout or two! Fun stuff! #flyfishing quick trip to check out the #troutfishing at #southlakespark in denton. caught #bluegill but did see others xatch #rainbowtrout A post shared by COAF Field Team (@coaf.field.team) on Nov 26, 2017 at 6:36pm PST
Read more