Foam Spider and Scud Tandem Rig for Bluegill #flyfishing

-

Finally found the pattern for the tight lipped Bluegill at the local pond. Went with a tandem rigged foam spider and scud!

Most fish went for the trailing scud and was surprised the little bass were readily striking the scud!

Foam Spider was a diy pattern made from Wapsi’s Foam Spider Kit. The Scud was a old pattern learned from a library fly tying video… uses possum or hares ear dubbing tied on a size 16 hook with a dubbing loop.

Liking this tandem rig… plan to use it on the commute to work on a couple of ponds!

Fun stuff!

Comments

Post a Comment

Enter a keyword to search for archived posts.

Popular posts from this blog

Why We Like Maltese Puppies #maltese

-
Image
Yesterday, was able to get a cast or two with the TFO Fly Rod. Casting the OPST Commando Head with the coated running line made for much easier line management. So far so good… will likely use this rod in place of the 5wt that has been “retired” to the closet. Have a video of the fishing yesterday; still editing it… only caught one Bass and fouled hook at that. Temps were chilly, Bass were not biting… even picked up one by hand and moved it to a more aerated area. For now, Charlie and I have been preparing for warmer weather; plan to take him kayak fishing later in the year. That said, how about a skit to provide a little humor to our viewers!
Read more

How Do We Clean and Cook Trout?

-
Image
Question from one of our Readers asking, “How do we clean and cook trout?” In answer to the question, we provide a summary of the different ways we clean and cook trout! Depending on the size of the trout, we clean and cook them as follows: Stocker size trout (9″-13″ in size) : We cut their heads or remove the gills (“gilling”), and then we remove the guts. Not sure why we opt to cut the head off versus “gilling” them; just seems to go one way or the other from trip to trip. When cooking the Stockers, we season them with salt and pepper (sometimes add Season Salt), and then pan fry them in oil for about 5-8 minutes each side. For larger trout in the 14″ – 18″ range: We clean them like the Stockers but will split the fish (butterfly). We then cook them on a cedar plank (see Grilled Plank Trout Recipe ). For trout going 19″+ in size: We gill them and remove the guts, leaving the head in place. Then, we stuff with lemon slices, onions, butter, and sprinkle Rosemary in the body cavity. Nex...
Read more

General Observations for Locating Fish in a River

-
Great info from one fisherman… Lloyd5: General Observations for Locating Fish in a River I've been fishing the same stretch of the Brazos for many years. Here are some observations on where to find different species in the river. These are not hard and fast rules, but fairly general in nature, yet they hold true an awful lot of the time. Bluegills are typically close to the bank, within about 6' of the edge. Bluegills love cover, so a good place to hunt for them is where there are tree branches in the water, or tree roots. I've seen a lot of bass tearing up the water right at the edge, going for the Bluegills, they are under constant attack, probably why they like cover so much. The further you get away from the bank the larger the Bluegill is likely to be. I've caught them in the middle of the deep zones, but not all that often unless the deep zone doesn't extend to the bank. Typically the further from the bank the larger the Bluegill will be. Bass generally stay i...
Read more

Black Near Deere Variant

-
Image
Here is a variant of the Near Deere tied using the same material as the Olive Near Deere but uses one black marabou plume and no chenille. Instead, the marabou plume is used in place of the chenille. We still prefer using chenille when tying a Near Deere, but in making do with what we have, this approach allows us to skip a trip to Cabelas just for one item – black chenille. The pattern works for stocker trout in our area, and skipping the chenille makes for a quicker tie. Do check out the steps below on how we tie the Black Near Deere Variant.   Tying the Black Near Deere Variant Picture 1 First step is to build the thread base like normal, ending just slightly past the point where a perpendicular line from the hook point to the hook shank would intersect. Then, build a slight “hump” with the tying thread as shown in Picture 1. The hump helps lift and spread the feathers of the marabou tail from the hook shank.     Picture 2 Next, measure a hook shank l...
Read more

Fly Casting with a Three Foot Fly Rod and no Reel... Hand Hold Revisited? #orvis #practicaster #demo

-
Image
This video answers the mail – a YouTube Viewer requested we show the hand hold we used in the video One Rod, No Reel. The intent of the One Rod, No Reel was to show quality fly line was more important than the fly reel, and the suggestion was to focus more on a quality fly line, followed by the fly rod, and then the fly reel for most fishing situations. In One Rod, No Reel, we used a premium but old 5wt WF Fly line that we have since retired… keeping about 8 yards of the forward portion of the fly line, attaching it to a short section of dacron backing, and a rubber band. We then attached the rubber band to the rod handle, and then demonstrated casting without a fly reel as well as catching a trout or two at a local pond. To answer the mail, we removed the 4wt fly reel that was zip tied to an Orvis Practicaster, and used the heavy “rope like” practice line that came with it to show the hand hold used. And since, we still had the fly line used in the One Rod, No Reel vi...
Read more

DIY Tanago Rod

-
Image
More tinkering around with ice fishing rod components. For ease of reference, calling it the Do It Yourself (DIY) Tanago Rod. Going to use it for Micro Fishing; hopefully to catch one of those “guppy” looking fish! Easy to make… used a 20″ solid fiberglass ice fishing rod, a 12″ wooden handle, and a braided cord for the lillian. Add some 2 pound test mono – smallest line in the tackle box, ready to try it out! DIY Tanago Rod compared to Micro Fly Rods
Read more

Lake Somerville Updates!

-
Image
  Liking this update on Somerville! Originally Posted By: J-Moe Originally Posted By: TXfisherman12 Fished the spillway early this morning and caught 1 hybrid (keeper that I gave to a guy who came running over to my side when he saw me reel in the fish), and also caught 1 white bass (also keeper but released), and missed something big. All bites occurred using artificials with no luck on fly rod. The bite for me shut down once the sun was getting higher on the horizon. I fished the spillway for about 1hr 45min and did not see any other fishermen catch any fish. Tried lakeside and using a ton of different panfish flies and bass lures I managed only 1 sunfish on a fly, even though they were very active tearing up some bugs on the surface. Overall, it was a bit frustrating for me but happy I at least caught something. On another note, I noticed that the Corps increased the outage around noon today by ~ 100 units (2157 to 2265). Not sure if this will improve what appears to be a slow b...
Read more